$139.9 Buy It Now or Best Offer free,30-Day Returns
Seller Store fansdealonline (11356)99.1%,
Location:Ontario, California, United States Ships to: US, Item:184529154594
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab Features:Easy Assembly, Easy Installation, Noise Vibration Reduction, Portable, Rust Resistant, Single-Speed Amperage:16A Certification:UL Certification Qmax:560 L/min Item Width:6.9″ Hmax:21 Meter Installation:Universal Installation Voltage:110 V Inlet:1.5″ Internal Horsepower:2.5HP Item Length:22.4″ Item Height:12.2″ Amper:16A Motor Shaft Material:Stainless Steel Power Source:Corded Material:ABS, Copper, PVC, Stainless Steel Speed:Single-Speed Outlet:1.5″ Internal 2.5HP:2.5HP Max. Temp:104 Degree Fahrenheit (40 Degree Celsius) Rated Power:1850W/2.5HP Item Weight:30 lb Power:1850w Power Cord:59″ Pool Type:In Ground &Above Ground Maximum Flow Rate:8800 GPH (560L/min) FANSDEALONLINE:FANSDEALONLINE Color:Black Energy Star:A+++ Frequency:60HZ Max. Flow:560 L/min Type:Pool Pump Pipe Compatibility:Fit 1.5 inch plumbing internally UPC:283961330595 MPN:4AZY8007 Suitable For:Above Ground Pools
eBay
Description
Maintain a crystal clear and sparkling pool or spa that everybody loves with the new SPPE series self-priming 1850W electric swimming pool pump. Thanks to its super-efficient IP55 1850W 2.5HP electric motor, you can save significant time and money- truly the industry’s most energy-efficient filtration pump.
How to use
1.Locate the pump as close as possible to the pool.
2.The pump suction line should not be smaller than the pressure line. All piping must be airtight
3.The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on.
4.The weight of the piping should be supported independently and not carried by the pump.
5.Fill the pump tank with water before starting.
6.High suction lifts, or long suction lines, require additional time and reduce the performance of the pump.
7.The water being pumped cools and lubricates the seal.
8.After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water.
Attention!! The installation must be according to the normal power indicated on the label. The amperage must not at any time exceed the value indicated on the label It is recommended that you consult a state-registered electrician. Place the pump in a dry area with good ventilation. The ambient temperature must not exceed 40℃ The pumps are only suitable for counter-clockwise rotation when viewing from the pump end.Three phase motors can rotate in either direction.Interchanging any of the cables on a three-phase motor will reverse the rotation.Momentarily start,or bump the motor without water in the tank,to check the rotation of the pump shaft. Before disconnecting electrical connections,shut off electricity at its source.Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons,including children with reduced physical,sensory or mental capabilities or lack of experience and knowledge,unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety Children should be supervised to ensure that they do not play with the appliance
Specification
Model : SPPE 250
Power : 1850W/2.5HP
Voltage : 110V / 60Hz
Max. Flow : 560 L/m
IP55 INS CL.F : Max. 50 C
Amps : 6.8
Head : Max 19m / 62.34ft
Capacitor : 25 F
Inlet : 1.5″ Internal
Outlet : 1.5″ Internal
Pipe Compatibility : Fit 1.5 inch plumbing internally
Noise Level : <65dB
Weight : 10.2 kg / 22.5 lbs
In The Box
1 x SPPE250 Swimming Pool Pump
1 x User’s Manual
Features
Powerful Self-Priming IP55 2.5HP Electric Motor, low noise with quiet operation and no leak.
Suitable for pools up to 100,000 litres.
Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min.
Full Size Removable Strainer Basket.
100% Salt and Chlorine compatible.
Full Commercial Duty – Designed to run 24/7.
Works with In ground and Above Ground.
Built-In Thermal Overload Protection.
Ideal for Residential/Commercial Swimming Pools & Spa’s.
Delivery
We have Two warehouses located in CA, and NJ, and the item will be shipped from one of them according to your location, and only to eBay ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product.
Frequently Asked Questions About 2.5HP 110V In/Above Ground Swimming Pool Pump Motor Strainer Hayward Replacement in My Website
funupacademy.com is the best online shopping platform where you can buy 2.5HP 110V In/Above Ground Swimming Pool Pump Motor Strainer Hayward Replacement from renowned brand(s). funupacademy.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling 2.5HP 110V In/Above Ground Swimming Pool Pump Motor Strainer Hayward Replacement on funupacademy.com?