950 951 Printhead For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw N811A

$121.85 Buy It Now or Best Offer
free,30-Day Returns

Seller Store mansencoltd
(2803) 98.9%,

Location: Los Angeles, California
Ships to: US,
Item: 405373822936

Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:60 Days
Refund will be given as:Money Back
Return policy details:
Unbranded:Unbranded
Compatible Brand:Universal
Compatible Model 1:For Hp officejet pro 8100
Compatible Model 2:For Hp officejet pro CM751
Compatible Model 3:For Hp officejet pro N811A
Compatible Model 4:For Hp officejet pro 8610
Compatible Model 5:For Hp officejet pro 8640
Money back or item exchange:within 180 days after receiving item,Yes
MPN:W002-D005
Size:104x90MM
Type:Refer Introduction
Warranty:5 Year

Before you buy this product, you need to pay attention to:NOTE: The printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, dont wipe it with cleaning fluid or eraser.2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).4. You dont need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless. Before you install this product, you need to pay attention to:1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machines own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work. Reufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dwFeature:Excellent performance and high quality.Made of high-quality material, durable, firm and stable for us to use.This is a cleaned, thoroughly tested and sealed Printhead.Good stability, long lifespan.Full color function.This is Aftermarket Replacement Item But Not Genuine.Size:104x90MMCompatible Models:Refurbished 950 951 PrintheadFor Hp officejet pro 8100For Hp officejet pro 8600For Hp officejet pro CM751For Hp officejet pro CM752For Hp officejet pro N811AFor Hp officejet pro 251dwFor Hp officejet pro 276dwFor Hp officejet pro 8610For Hp officejet pro 8620For Hp officejet pro 8630For Hp officejet pro 8640Packing includes:1 x print headNote:1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.After loading the print head, please dont install ribbon overhead 10 pieces of A4 document,so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,so please troubleshoot the problem of the mainboard before replacing the print head. In addition,the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.There is a regulation that printhead is not warranty, and it is delicate and expensive.please do not make commissioning on the machine, and please treat it with caution.4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair stationor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble. -About USFounded in 2012, VIPJQ have professional development and sales, and are involved in various products, providing customers with various high-quality products.Since its establishment, VIPJQ has always adhered to the service concept of “customer first” and the management concept of “pursuit of quality”, and is committed to providing customers with high-quality original designs.We commit to provide you the best innovative, quality products & professional services with competitive prices.We value every customer, and we look forward to providing solutions for your business needs to help your business achieve its goals, please contact us immediately! We are all about you! We are a Japanese seller,but with large warehouse in USA. We are profesional on Auto Parts,Car Parts,Motorcycle Parts,3C,other hot sale items and so on. We aim to provide to customers high quality product and best service. -About Shipment&Returns The item usually will be dispatched within 3 days after you ordered.All are free shipping. And it usually takes 3-10 working days to delivery depends on buyers address or other majeure on the way. If you are not satisfied with the items and want to return the item,we hope you could message us first,we will give you the return details, we think we could give you the best service to save your time and money.Thank you. -About Feedback&Customer Service If you are enjoy your shopping here,not only enjoy the items but also the service,we are appreciate you could give us a 5-star feedback. If you are not satisfied with the item,before you give us the negative feedback,we hope we could give you the best solution through our commutication. We think we could do it if you give us the chance.Thank you.

Frequently Asked Questions About 950 951 Printhead For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw N811A in My Website

funupacademy.com is the best online shopping platform where you can buy 950 951 Printhead For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw N811A from renowned brand(s). funupacademy.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 950 951 Printhead For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw N811A on funupacademy.com?