GE KrautKramer USM GO Ultrasonic Flaw Detector USMGO

$4889.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store abtech_global
(4543) 100.0%,

Location: Southgate, Michigan
Ships to: US,
Item: 335603985738

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
GE:GE
MPN:Does not apply
USM GO:USM GO

The Following Items Are Included: GE USM GO Ultrasonic Flaw Detector (BC# 38137-L/T*) AC Adapter/Charger Power Cord USB PC Interface Cable User Manual On CD-ROM Carrying Case (G) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! GE USM GO Ultrasonic Flaw DetectorThe new ultrasonic Go platform from GE’s Inspection Technologies business combines a thickness gauge and a flaw detector in one single lightweight instrument.Includes Hard Carrying Case & Accessories As Listed Above! Working Condition: ExcellentCondition: RefurbishedCalibrated: YesWarranty: 1 YEAR WARRANTY GE USM GO Ultrasonic Flaw DetectorErgonomically Designed with the User in Mind The USM Go ultrasonic portable flaw detector has been ergonomically designed to provide an instrument that is light, small and easy to use in the harshest of inspection environments Features: Portability Small size, lightweight, robust, dust- and waterproof construction allow the instrument to be easily operated in confined spaces, areas of difficult access, and in harsh environments. Can be operated with one hand, leaving other hand free for other tasks, such as maintaining probe in optimum position or holding on to ladders. Light enough to be carried throughout a whole day’s shift. Battery provides up to 6 hours operation. Can be recharged on- or off-board. Several accessories to improve mobility are available: wrist strap, shoulder harness, belt holster. Easy-to-Read Screen A display screen that is the same size as those in other GE flaw detectors, even though the instrument is much smaller than other instruments in the range An 800 x 480 pixel display, which is better resolution than a standard DVD. A screen with an optimized aspect ratio to ensure highly defined echo separation. A screen that can be easily viewed, whether hand-held or desk-mounted. A screen that has been ergonomically sized to help reduce eyestrain. An integrated stand allows the user to optimize the viewing angle, when the instrument is desk- or benchmounted AutoGate Threshold for faster measurement with optimum accuracy. A-scan freeze mode function (for gate A and B) fascilitates working in difficult ergonomic conditions. Display measurement indicators show both amplitude and distance to reduce risk of error Ease of Use Pressure-sensitive joystick imported and adapted from the successful range of remote visual inspection and ultrasonic equipment offered by GE. All controls within fingertip reach. User can dedicate function keys according to preference A “Flip” function allows the instrument to be used equally well by left-handed and right-handed people. A standard USB connection to allow data to be downloaded from the flaw detector for further analysis or storage. The instrument’s 2 GB memory can be easily exchanged by SD cards up to 16 GB Reports are produced in jpeg format so there is no need for special reading software. Printable summary list of all parameters Easy directory management on SD cards Built-in menu customization tool allows to adapt the menu structure to two levels of users. Smart notes function increases reporting efficiency. Yearly calibration reminder for efficient quality management Increasing Productivity The USM Go features intuitive operation so there is virtually no time-consuming, learning curve. You are productive from the moment you pick it up! There is no need to refer to the manual, as clear instructions are provided as you go along. Navigation is simplified using the proven graphical user interface (GUI) and the innovative joystick, allowing one-handed operation for fast and accurate adjustment. Other features allowing increased productivity are: A robust molded rubber casing to withstand the harshest environments and significantly reduce downtime. The instrument is dust- and waterproof to IP67 and is tested to withstand shock and vibration A simple on-board data logger to collect and save thickness measurements or eventually attach the corresponding A-scan image. Backwall Echo Attenuator (BEA) helps to find very small defects improving detectability. Automatic Gate Threshold for the 2 gates ensuring accurate measurements made under the same conditions Video recording upto 8 minutes allows live reporting. High UT Performance State-of-the-art electronics, including digital amplification, for a wide range of application benefits. A wide Pulse Repetition Frequency range allows use at low PRF to inspect forged parts without any “ghost” echoes and to inspect welds at high PRF when fast and regular scanning movement is required. Precise Time of Flight indication in µs. TrueDGS compatible. Versatile and Upgradeable Customized versions of the USM Go are also available, specially adapted to meet specific inspection codes or applications. For example, an optional square wave pulser can be supplied for applications involving the inspection of highly attenuative material. The versions shown in the table are currently available. For more detailed information, please contact your local GE representative or visit www.ge-mcs.com. A Wide Range of Applications The USM Go has been designed to provide flaw detection capability in inspection situations throughout the industrial and process spectrum, from aerospace to power generation and from the automotive sector to the oil and gas industry. These include: Weld Inspection: Trigonometric projections AWS DAC DGS Inspection of Forgings and Castings: Manual PRF adjustment Phantom echo indicator DGSS Backwall Echo Attenuator (BEA) Inspection of rails: High PRF (up to 2000 Hz) Lightweight: 850 g (1.87 lb) Small size and ergonomics Inspection of Composites: RF Display 2 gates with B-start triggered with echo in gate A TCG correction with high slope 120 dB/µs Reflector depth indicated in layer For more demanding applications: Narrow band filters Low noise digital amplifier TCG correction with high slope 120 dB/µs Backwall Echo Attenuator (BEA) Specifications: LCD Display Active Area W x H: 108 mm x 64.8 mm (4.25” x 2.55”) Screen Diagonal 5.0” Pixel Resolution W x H: 800 x 480 pixels Connectors Probe Connectors Two LEMO-00 UT Output Connector SAP output, alarm USB Interface Micro USB connector SD Card Connector Full size SD card slot to accommodate standard SD cards Pulser – All pulser measurements taken according to EN12668 specifications Pulser Mode Simulated spike standard, uni-polar square wave optional Pulser Voltage (SQ Mode) 120 V to 300 V with 10 V steps Pulser Width (SQ Mode) 30 ns to 500 ns with 20 ns steps Pulser Amplitude (Spike Mode) Low : 120 V High: 300 V Damping 50 or 1000 Ohms PRF Automatically optimized between 15 Hz to 2000 Hz, 3 automatic adjustment modes : AutoLow, AutoMed, AutoHigh – Manual Control of PRF from 15 to 2000 Hz Receiver Range 14016 mm at steel longitudinal wave (557”) Digital Gain Dynamic range of 110 dB, with 0.2 dB step Analog Bandwidth 0.2 MHz – 20 MHz Filters Broad band Narrow band filters 1; 2; 2.25; 4.5; 10; 13; 15 MHz Gate Independent Gates 2 Gates (A and B), Gate B can support triggering by Gate A Rectification Full Wave (FW) Positive (POS) RF Negative (NEG) Measurement Peak, Flank, JFlank Measurement units TOF in, mm, µs Amplitude % dB Memory Capacity 2 GB SD card. Up to 16 GB memory cards can be used Report Jpeg and BMP reports Data Logger Option for thickness or A-scan recording, compatible with UltraMATE Environmental Battery 6 hours battery life On board charging Off board charging with optional adaptor Proportional battery gauge indicating remaining operation time Automatic energy server mode (Auto Off) allows saving battery life by putting the instrument in sleep mode automatically when not in use Charger “Universal” AC (100-240 V, 50-60 Hz) Meets CCC, CE, UL, CSA and PSE requirements Size 175 mm x 111 mm x 50 mm (6.8” x 4.3” x 1.9”) Weight 845 g (1.87 lb) with the battery Languages Bulgarian, Chinese, Czech, Dutch, English, French, German, Hungarian, Italian, Japanese, Portuguese, Polish, Russian and Spanish Protection as per Mil-Std-810F Damp Heat and Humidity (Storage) 10 cycles: 10 hrs at 60°C (140°F) down to 30°C (86°F), 10 hrs at 30°C (86°F) up to 60°C (140°F), transition within 2 hrs, 507.4 Temperature Shock (Storage) 3 cycles: 4 hrs at –20°C (-4°F) up to 60°C (140°F), 4 hrs at 60°C (140°F), transitions within 5 minutes, 503.4 Procedure II Vibration 514.5-5 Procedure I, annex C, figure 6, general exposure: 1 hr each axis Shock 6 cycles each axis, 15 g, 11 ms half sine, 516.5 Procedure I Loose Cargo (In Shipping Container) 514.5 Procedure II Transit Drop (Packaged for Shipment) 516.5 Procedure IV, 26 drops Operating Temperature Range 0°C to 55°C (32 to 131°F) Storage Temperature Range -20°C to 60°C (-4 to 140 °F) with battery, 24 hrs Dustproof / Waterproof As per IEC 529 specification for IP67 classification Compliance EMC/EMI EN 55011 EN61000-6-2:2001 Ultrasound EN 12668 ASTM E1324 E317 ANSI/NCSL Z 540-1-1994 MIl STD 45662A MIL STD 2154 For full GE USM GO product specifications, please click here: GE USM GO Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR’s, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don’t hesitate to contact us for a Quote on Something you don’t see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don’t have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we’ll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click “Get Rate”.Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost’s and we recommend that you contact your countries customs agency for that information.We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou.Inventory and Ecommerce Management

Frequently Asked Questions About GE KrautKramer USM GO Ultrasonic Flaw Detector USMGO in My Website

funupacademy.com is the best online shopping platform where you can buy GE KrautKramer USM GO Ultrasonic Flaw Detector USMGO from renowned brand(s). funupacademy.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling GE KrautKramer USM GO Ultrasonic Flaw Detector USMGO on funupacademy.com?