GenComm GC7105A Base Station & Cable Antenna E1 T1 Interference Analyzer WIBRO

$2589.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store abtech_global
(4543) 100.0%,

Location: Southgate, Michigan
Ships to: US,
Item: 354400167140

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
GenComm:GenComm
MPN:Does not apply
GC7105A:GC7105A

The Following Items Are Included: GenComm GC7105A Base Station Analyzer w/ Options (BC# 19283-L/T*) Option 003: Gain/Loss Measurement Option 004: GPS Receiver Option 005: E1/T1 Analyzer Option 007: Cable & Antenna Analyzer Option 008: Interference Analyzer Option 020: cdmaOne/cdma2000 Analyzer Option 021: EVDO Analyzer Option 030: WCDMA Analyzer Option 031: HSDPA Analyzer Option: WIBRO Analyzer (2) Armored Test Port Cables GC7105A Base Station Analyzer Software CD Alligator Clip Cable (Attaches to Unit) Ethernet Cable AC Adapter/Charger Power Cord RS232 PC Interface Cable User Manual On CD-ROM Hard Carrying Case (G) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! GenComm GC7105A Base Station & Cable Antenna E1 T1 Interference Analyzer Installed Options:- Option 003: Gain/Loss Measurement – Option 004: GPS Receiver – Option 005: E1/T1 Analyzer – Option 007: Cable & Antenna Analyzer – Option 008: Interference Analyzer – Option 020: cdmaOne/cdma2000 Analyzer – Option 021: EVDO Analyzer – Option 030: WCDMA Analyzer – Option 031: HSDPA Analyzer – Option: WIBRO Analyzer Combines the functionality of spectrum analysis, cable and antenna analysis, power meter, and modulation analysis Includes Hard Carrying Case & Accessories As Listed Above! Working Condition: ExcellentCondition: RefurbishedCalibrated: YesWarranty: 90 Day Exchange Warranty GenComm GC7105A Base Station AnalyzerThe GC7105A is a Base Station Analyzer for installation and maintenance of modern wireless communication systems. It combines the functionality of spectrum analysis, cable and antenna analysis, power meter, and modulation analysis, including: CDMA2000, EVDO GSM, GPRS, EDGE WCDMA, HSDPA The GC7105A has been designed with a wide bandwidth analysis capability, ensuring the compatibility with future wideband technologies such as Fixed WiMAX and Mobile WiMAX.The GC7105A is the perfect field testing solution that combines portability, due to its lightweight design and battery extended operation, and performance, with its multifunction capability and high resolution display. In addition, the GC7105A provides an Auto-Measurement test capability which dramatically increases user’s productivity.The GC7105 is the optimal solution for installation and maintenance of wireless communications systems.Spectrum AnalyzerThe Base Station Analyzer has a general purposed spectrum analyzer which is the most flexible test tool for RF analysis. Beyond this basic spectrum analysis functionality, a built in RF measurement application provides a single button RF power measurements including: Channel Power Adjacent Channel Power Spectrum Emission Mask Occupied Bandwidth Interference AnalyzerThe Base Station Analyzer has an interference analyzer which is the most effective way to identify periodic or intermittent interference. A spectrogram display allows the user to capture spectrum activity while displaying frequency, power and time information.The signal tracking capability is particularly useful for observing signal strength at a single frequency over time with an audible indication.Transmitter AnalyzerThe modulation measurement suite of the Base Station Analyzer provides not only RF parametric analysis but also modulation parametric analysis for modern wireless communication systems. Built-in wireless standard test procedures allow users to test each of the following items with a single button action. CDMA2000 / EVDO Analyzer CDMA Channel Power CDMA Adjacent Channel Power CDMA Spectrum Emission Mask CDMA Occupied Bandwidth CDMA Code Domain Power Frequency Error Time Offset Waveform Quality PN Search WCDMA / HSDPA Analyzer WCDMA Channel Power Adjacent Channel Leakage Power Ratio (ACLR) WCDMA Spurious Emission Mask WCDMA Occupied Bandwidth WCDMA Code Domain Power Error Vector Magnitude (EVM) Peak Code Domain Error (PCDE) Auto Scramble Search Cable and Antenna AnalyzerThe Base Station Analyzer can perform also the function of an antenna and cable analyzer that measures cable loss, distance to fault (DTF) and voltage standing wave ratio (VSWR).The antenna and cable analysis functionality can characterize active and passive devices such as cables, filters, amplifiers, antennas and multiplexers.In one port measurement, users can measure feed-line cable loss, DTF location, and Antenna VSWR. And with two ports measurements users can perform gain measurements, insertion loss, and isolation; particularly useful for filters, amplifiers, Tower Mounted Amplifiers (TMA), RF path gain, and antenna isolation. Power MeterThe Base Station Analyzer can perform two power testing methodologies: Internal, for standard power measurements without the assistance of external power sensors. External, for high accuracy power measurements with the assistance of external power sensors. The internal power meter, with no additional power sensors, uses the spectrum analyzer functionality. It is a simple test methodology with reasonable accuracy. On the other hand, external power sensors perform power measurements more accurately.The Base Station Analyzer can be equipped with a Directional Power Sensor (through-line) which has the advantage to minimize service disruption and covers an ultra-wide power range. Power displays in either dBm or Watts Upper/Lower limit available with Pass/Fail indication E1/T1 AnalyzerThe Base Station Analyzer also provides a testing solution for E1/T1 transmission lines. Various test modes are available including: Mode: Terminated, Monitor, Bridge, Loop Frame: PCM30, PCM31, Unframed Code: AMI, HDB3, B8ZS TX Pattern: 1-8, 1-16, ALL0, ALL1, 0101, 2E20 E1/T1 Pulse Mask Alarm, Error Count and Logging Auto-MeasureCell sites may present irregular malfunctions which are difficult to isolate. In such cases, the Base Station Analyzer monitors the cell site for a long period of time in order to capture enough measurement data to detect the exact symptoms and isolate the problem. The Auto-Measure functionality provides an easy setup for testing, including the programming of measurement schedules such as starting time, duration, intervals, and measurement parameters.Based on user definable conditions, the Base Station Analyzer performs the tests and automatically stores the results.Features: Multi-function Integration The GC7105A has integrated all the necessary functions to test and measure modern wireless communication systems. Its combined functionality includes spectrum analysis, cable and antenna analysis, power meter, channel scanner, E1/T1 analysis and modulation analysis for CDMA2000, EVDO, GSM, GPRS, EDGE, WCDMA, and HSDPA. Easy-to-use User Interface A common interface through its multiple functions provides the same menu structure that is easy to learn and use. It allows a quick configuration set for complicated radio systems, making a single button action to properly configure the instrument. Auto-Measurement and Error Logging The Auto-Measurement function is used to test mobile systems and store the results to either internal or external memory under specified measurement conditions and schedules through user defined scenario. This functionality is particularly important for effective tracking, monitoring and isolating intermittent problems. Compact and Lightweight Design The GC7105A is a compact and portable solution for users to perform outdoor maintenance jobs. The built-in high capacity Li-ion battery allows jobs at remote sites without being restricted by power cord. Easy to Upgrade The GC7105A was designed to support all features upgrades, either hardware or firmware, to be implemented in the instrument’s framework, providing convenience, and reliability. This architecture has the unique benefits of configuring the Base Station Analyzer for today’s needs and an easy upgrade path for future requirements. Specifications: Standard Frequency Accuracy ±0.05ppm Internal Frequency Aging ±0.5ppm / year Display 8.4”TFT LCD800 x 600 mode Frequency and Time Reference Even Second TTL 10 MHz,13MHz,15MHz -10 ~ +10dBm Spectrum Analyzer Input Frequency Range 100kHz ~ 3GHz Maximum Input Level +30dBm (1W) Amplitude Accuracy ±1.0dB Resolution Bandwidth 100Hz ~ 1MHz (1-3 sequence) Video Bandwidth 1Hz ~ 1MHz (1-3 sequence) Dynamic Range > 85dB Input Attenuation 0 ~ 55dB (step 5dB) SSB phase noise -95dBc @30KHz offset-105dBc @100KHz offset DANL Typical -140dBm @100Hz RBW with Preamp OnFrequency Typical Max10MHz ~ 1GHz -140dBm -142dBm1GHz ~ 2GHz -138dBm -140dBm2GHz ~ 3GHz -138dBm -138dBm Measurement Range DANL ~ +30dBm Port 1 VSWR <1.5 Power Meter Frequency Range 100KHz ~ 3GHz Display ±100dBm (user settable) Measurement Range -70dBm ~ +30dBm Offset Range 0 ~ 60dB Accuracy -40dBm ≤ Power ≤ +30dBm ±1.0dB-70dBm ≤ Power < -40dBm ±1.5dB VSWR < 1.5 Maximum Power +30dBm(1W) without external attenuator Cable and Antenna Analyzer Frequency Range 25MHz ~ 3GHz Frequency Resolution 100KHz Data Point 126, 251, 501, 1001 VSWR VSWR Range 1 ~65 Return Loss 0 ~ 60dB Resolution 0.01 or 0.01dB Cable Loss Dynamic Range 0 ~ 30dB Resolution 0.01dB DTF(Distance to Fault) Distance 1250m (4125ft) Horizontal Range 0 to (# of data points-1) x (resolution-1)/2 Resolution (1.5x108)(VP)/(Delta)(ZF)Vp: Cable's relative propagation velocityDelta[Hz] = Stop Freq – Start FreqZF(Zoom Factor) = Setup Dist./Max Dist VSWR Range 1 ~ 65 Return Loss Range 0 ~ 60dB Gain/Loss Measurement Frequency Range 25MHz ~ 3GHz Frequency Resolution 100KHz Output Power Level -10dBm typical Dynamic Range 25MHz ~ 2GHz 80dB2GHz ~ 3GHz 60dB CDMA TX Analyzer Frequency Range 410MHz ~ 495MHz, 805MHz ~ 940MHz1750MHz ~ 2170MHz Frequency Accuracy ±10Hz + Ref Freq/Time Accuracy Waveform Quality (p) ±0.005 for 0.9 < p < 1 Pilot Time Alignment (Tau) ± 0.5μs Code Domain Power ±0.5dB relative power±1.5dB absolute power Pilot Power ±1.0dB Channel Power ±1.0dB EVDO TX Analyzer Frequency Range 410MHz ~ 495MHz, 805MHz ~ 940MHz1750MHz ~ 2170MHz Frequency Accuracy ±10Hz + Ref Freq/Time Accuracy Waveform Quality(p) ±0.005 for 0.9 < p < 1 Pilot Time Alignment (Tau) ± 0.5μs Code Domain Power ±0.5dB relative power±1.5dB absolute power Pilot Power ±1.0dB Channel Power ±1.0dB WCDMA/HSDPA TX Analyzer Frequency Range 869MHz ~ 894MHz,1710MHz ~ 2170MHz Frequency Accuracy ±10Hz + Ref Freq/Time Accuracy EVM Accuracy ±2.0% for 2% < EVM < 20% Residual EVM 3.0% typical Code Domain Power ±0.5dB for code channel power > -27dB16, 32, 64 DCPH (Test Mode 1)16, 32 DCPH (Test Mode 2, 3) CPICH Accuracy ±1.0dBm Channel Power ±0.7dB (Typical) Occupied Bandwidth ±100KHz Residual ACLR < -56dB @5MHz, < -58dB@10MHz ACLR Accuracy ±0.7dB T1 Analyzer Error Detect Code BPV, Frame, CRC Alarm Detection Red Alarm, Yellow Alarm, AIS Alarm Receive Level +6 ~ -36dB DSX Electrical Interface Connectors RX/TX RJ48C (100Ω) Output 0dB, -7.5dB and -15dB Line Code AMI, B8ZS Impedance 100Ω or 1000Ω (Bridge) Input Term/Bridge/Monitor/Loop 0 ~ -20dB Transmitter and Receiver Framing D4, ESF, SLC96, T1 DM, Unframed Channel Formats Full T1 Test Pattern 1-8, 1-16, ALL1, ALL0, 01013E-24, QRSS, 2E-23, 2E-152E-23 inverse, 2E-15 inverse Additional Functions Reference Clock Received or Internal Event Log Capability Internal Memory or External USB Error Insertion 1E-5, 1E-6, 1E-7 Error Rate Count CRC, Frame Code Calculated BER Pulse Mask Checking E1 Analyzer Error Detect Code BPV, FAS, CRC-4 Alarm Detection FAS RAI, MFAS RAI, AIS Receive Level +6 ~ -36dB DSX Electrical Interface Connectors RX/TX RJ48C (120Ω) Output 0dB, -6dB (ITU-T Rec.G.703) Line Code AMI, HDB3 Impedance Term, Monitor 120ΩBridge > 1000Ω Input Term/Bridge/Monitor 0 ~ -20dB Transmitter and Receiver Framing Unframed, PCM-30, PCM-30 with CRCPCM-31, PCM-31 with CRC Channel Formats Full E1 Test Pattern 1-8, 1-16, ALL1, ALL0, 0101, 20ITU Additional Functions Reference Clock Received or Internal Event Log Capability Internal Memory or External USB Error Insertion 1, 1E-5, 1E-6 and 1E-7 Error Rate Count CRC, Frame Code, Calculated BER Pulse Mask Checking External Reference Clock 10, 13, 15MHz External Reference Input Power -10 ~ +10dBm Connector Type SMA Female Even Second Input Level TTL Compatible Connector Type SMA Female Environmental Condition Operation Temperature -5°C ~ 50°C (23°F ~ 122°F) Storage Temperature -20°C ~ 70°C (-4°F ~ 158°F) Calibration Cycle 1 year Dimension Weight 5.6kg(12.1lb) (Including Battery) Size (W x H x D) 315 x 245 x 95mm (12.4′ x 9.6′ x 3.7′) General Interface Ports Serial 1 Port USB 1.1 1 Port 10Mbps LAN 1 Port GPS Antenna (SMA) 1 Port Built-in Speaker Battery (Lithium Ion) Nominal Voltage 11.1V Normal Capacity 7200mA Minimum Charge Voltage 12.6V Battery Running Time 1.5 Hours at full charge Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR’s, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don’t hesitate to contact us for a Quote on Something you don’t see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don’t have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we’ll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click “Get Rate”.Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost’s and we recommend that you contact your countries customs agency for that information.We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou.Inventory and Ecommerce Management

Frequently Asked Questions About GenComm GC7105A Base Station & Cable Antenna E1 T1 Interference Analyzer WIBRO in My Website

funupacademy.com is the best online shopping platform where you can buy GenComm GC7105A Base Station & Cable Antenna E1 T1 Interference Analyzer WIBRO from renowned brand(s). funupacademy.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling GenComm GC7105A Base Station & Cable Antenna E1 T1 Interference Analyzer WIBRO on funupacademy.com?