Hyundai Tucson OBD2 Foxwell Fault Code Reader Scanner Diagnostic Reset Tool US

$86.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Houston, Texas, United States
Ships to: US,
Item: 166449147107

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Warranty:Yes
Engine Function 1:Turns off Check Engine Light (MIL)
Feature 1:scanner code reader scanner tool
Vehicle Type:Passenger Vehicle
Manufacturer Part Number:Foxwell NT301
Feature 3:better than elm327 ad310
Engine Function 4:Displays live O2 sensor test data
Feature 2:scanner automotive fault code reader
Engine Function 5:Reads live PCM data stream
Engine Function 2:Views freeze frame data
Item Type:Car Electronics Code Readers & Scan Tools
Engine Function 3:Displays monitor and I/M readiness status
Update:Life-Long Free Upgrade
Engine Function 6:Enhanced OBDII Mode 6
Foxwell:Foxwell
Supported System:Engine
Software Version:foxwell NT301
Function:Car Scanner, Car Repairs, OBD2 Code Reader
Type:Auto Code Reader
Language:Spanish,English,French
Connectivity:USB
OBD Interface:EOBD, OBDII, CAN
Shipping:free shipping from US,fast and safely
UPC:655421695856

eBay 2023 OBD2 Foxwell NT3 Fault Code Reader Scanner Diagnostic Reset Car Tool As everybody who has cars knows, people always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on. However, most of them don’t know they could make it off themselves with dozens of dollars – using A Foxwell obdII code scanner. This auto code reader could resolve most reasons which caused engine light on, and tell you what’s wrong with your car engine, and if it is necessary to be sent to workshop. Altogether, the Foxwell NT301 car diagnostic scan tool would save you much time and money. It is also a great choice if you are looking for an obd scanner well-built, easy-use with wide vehicle coverage. Vehicle CEL Doctor: Locate bad O2 sensor, turn off check engine light, reset monitor, read enhanced data. The obd2 scanner can quickly read and erase DTC (engine fault codes). Access to emissions readiness status, on-screen DTC definitions, built-in DTC look up library, allow you accurately determine causes of check engine light, and turn off the MIL(Malfunction Indicator Lamp). Automatic VIN acquisition and decoding make it easier to read manufacturer specific codes and enhanced mode 6 data. Accuracy: Live data in both graph and text forms. Accurately read and clear vehicle error codes for Worldwide cars, SUVs, light truck and 12V diesels equipped with Obd2. Besides, the car scanner also shows live vehicle sensors data in text and graph format and allows you to focus on any suspicious or symptom-specific data parameters. Worthy to Own: Supports data logging feature and the ability to record and review log. Printer compatible. Unique PATENTED design, clearly arranged keypad, 2. 8″ wide TFT color screen with Life-Time Free software update and 1 year Money Back , it deserves to own. Supported by EXCLUSIVE engineer and service team for product and service quality. (Please note currently the package does not include a CD. ) Smog Check Helper: Read/Erase DTC and I/M readiness hot keys make it easy to use this car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for smog test. The obdii scan tool also help catch intermittent problems and confirm repairs during a drive cycle, so that help you quickly determine the health of the car. Home Necessity: NT301 engine tool is open to global customers. It is an upgraded version from the basic car obdii diagnostic scanner with distinctive features. No battery required, it is charged directly from the OBDII car scanner interface in your vehicle (please turn your vehicle ignition on), making it convenient for Home and Autoshop Mechanics. Supported OBD2 Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), CAN (Control Area Network ISO 11898). Support Full 10 Engine System Functions Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs) Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability. The Foxwell obd2 code scanner can read and erase codes which can also retrieve a wealth of information from the Engine Control Unit (ECU). The ECU is what triggers the Check Engine Light when there is a problem with your car. Parts might cause your check engine light on include: #1. Gas Cap #2. Oxygen Sensor #3. Air Fuel Ratio Sensor #4. Mass Air Flow Sensor #5. Ignition Coils #6. Spark Plug Wires #7. Spark Plugs #8. Thermostat #9. EGR Valve #10. Evaporatative Emission Canister Purge Valve(EVAP) #11. Catalytic Converter. Enhanced OBD II functions NT301 obd2 scan tool can not only read and clear engine fault codes, save money for you, but also have some enhanced functions which could help you find some deep problems so that makes your diagnosis easier. LED Notifications: Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle. Data Log: The NT301 engine code reader records PIDs for later use to help you diagnose intermittent driving performance problems which can not be determined by any other methods. DTC Help: Press “HELP” button with DTC guide for possible causes if codes show the small “?” icon. VIN Retrival: Automatic VIN acquisition and decoding make it much easier to read manufacturer specific codes and enhanced mode 6 data. Print Data: If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help. Important notes: This NT301 will read/clear codes from EOBD diagnostics systems (this covers engine and emissions faults). It will not read/clear codes from other systems, e.g. SRS, ABS or Suspension systems. It will not reset annual service indicator lights. In addition, it is 2.8” TFT color screen and hot keys for I/M readiness test, and reading/clearing DTCs make it excellent value for money Foxwell NT301 Supported Language English, Spanish, French, German, Polish, Portuguese, Hungarian, Dutch, Italy and Swedish Foxwell NT301 Support Car Maker： American & European cars: Works on OBDII car from 2001 year to now Japanese Cars: Works on OBDII car from 2003 year to now Asian Cars: Works on OBDII car from 2008 year to now PS: NT301 Can be worked on diesel engine cars as well. Even though it compatible with most cars from 2001 year, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. if you are not sure whether it compatible with your car, please do not hesitate to contact us first(tell me the model, release year and engine), I will check it for you.(to avoid you buy it wrong). Foxwell NT3 Specifications Display: 2.8” TFT color screen Operating Temperature: 0 to 60°C (32 to 140°F) Storage Temperature: -20 to 70°C (-4 to 158°F) Power: 8 to 18 V provided via vehicle Supported Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898) Dimensions: 145*94*32 MM Weight: 0.6 KG Dimensions of Packaging: 265*175*42 MM Dimensions of Carton: 530*525*336 MM Net Weight/CTN: 28.8KGS Gross Weight/CTN: 32KGS ☑Packaging included 1 x NT301 OBDII/EOBD Code Reader 1 x NT301 User’s Guide 1 x USB cable

Frequently Asked Questions About Hyundai Tucson OBD2 Foxwell Fault Code Reader Scanner Diagnostic Reset Tool US in My Website

funupacademy.com is the best online shopping platform where you can buy Hyundai Tucson OBD2 Foxwell Fault Code Reader Scanner Diagnostic Reset Tool US from renowned brand(s). funupacademy.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Hyundai Tucson OBD2 Foxwell Fault Code Reader Scanner Diagnostic Reset Tool US on funupacademy.com?