MCW Finishes Enamel Model Paints 15ml – Automotive Colors

$6.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store nodicor
(24320) 99.8%,

Location: Pittsburgh, Pennsylvania
Ships to: US,
Item: 403334705083

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Type:Enamel Paint
MCW Finishes:Enamel Model Paint
MCW Finishes:MCW Finishes

MCW Finishes Enamel Model Paints 15ml – Automotive Colors New In Bottle MCW Finishes released a new line of enamels to replace the discontinued Testors Model Master Same diameter and lid size as Model Master, but slightly taller, more paint than a Testors bottle (15ml vs 14.7ml)Colors are mixed to the original factory formula You can brush or airbrush these paints They can be thinned with MCW Finishes reducer or lacquer thinner These enamels, like their lacquers are made from the highest quality toners A shaker ball is included in the bottle for ease of mixing. Additional ID label is on top of the bottleFor Airbrushing Please Note:MCW finishes recommends thinning their enamel paint at about three parts paint 1 part thinner for their flat colors, and 3 parts paint 2 parts thinner, up to 1-part paint and 1 part thinner with their gloss colors. MCW Primer needs to be thinned 1 part primer to 2 parts thinner. This will vary depending on your airbrush and spraying conditions. MCW recommends using their enamel reducer or lacquer thinner. Do not use mineral spirits.In their trials, they sprayed the paint at about 25-30 psi. Depending on airbrush and conditions you may want to adjust your pressure up or down.MCW recommends spraying it a lower pressure for fine details also for fine details you may want to some more reducer.MCW Enamel Clear (1017E) is a crystal-clear enamel. It will dry on its own but stays soft. MCW recommends using their 1017EH Clear Hardener. The mix ratio is 2 parts clear to 1 part hardener and thin as desired.You can add MCW Enamel Hardener (1003E) to the paint which will fully cure it in eight hours at 70 degrees F. This will make the paint less likely to be reactivated with additional coats of enamels. If you want to add the hardener, the ratio is 8 parts paint, 1-part hardener, and 1-2 parts thinner. MCW recommends that you do not add hardener to any paint that you do not plan on using right away. If you are using a color cup, use a pipette to mix using the above ratio.MCW recommends using a good primer like the MCW line of primers to help adhesion and to help avoid pooling or pulling from high and low spots. Once dry the paint can be wet sanded and buffed to a high shine and one of your favorite clears can be applied. MCW recommends thinning their primer 1 part primer to 2 parts thinner. MCW recommends that you practice before using MCW paints as in most cases they tend to shoot a lot different than other paints you may have used. Flammable item. This item will be shipped using a ground service Item can not be shipped outside the lower 48 states Item can not be shipped to Alaska, Hawaii, Guam, Puerto Rico, Virgin Islands or APO/FPO

Frequently Asked Questions About MCW Finishes Enamel Model Paints 15ml – Automotive Colors in My Website

funupacademy.com is the best online shopping platform where you can buy MCW Finishes Enamel Model Paints 15ml – Automotive Colors from renowned brand(s). funupacademy.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling MCW Finishes Enamel Model Paints 15ml – Automotive Colors on funupacademy.com?